Liquid Poly Repair Kit
This liquid polyurethane repair kit comes with everything you need to repair your polyurethane base.
Items in the kit include:
- Liquid Polyurethane
- Clear Repair Tape
- Polyurethane Base Patch
Storage: Keep bottle out of light when not in use to prevent discoloration. Keep bottle tightly capped when not in use. To avoid cap from becoming sealed to bottle after using, be sure there is no liquid polyurethane on the neck when closing.
Directions
Repair Instructions
Clean and dry the area of the polyurethane base to be repaired. Apply the clear repair tape to damaged area. (Use special tape enclosed; do not use this tape for anything else.) Brush a VERY THIN coat of liquid polyurethane over the clear tape and blend into surrounding polyurethane of the base using the brush. Dry immediately with low heat of hair dryer or let dry naturally overnight for best result.
Re-enforcement for clips, fusion, etc
Using the pre-coated monofilament enclosed, sew clip (or hook, etc.) to a small piece. Apply liquid polyurethane to other side and to the area on the base where clip is to be attached. Stick together and let dry naturally overnight.
To make tape pads on monofilament base
Apply a thin coat of liquid polyurethane where tape pad is desired. Dry immediately with low heat of hair dryer or let dry naturally overnight for best result.
Ingredients
N/A